<em id="vnjby"><ruby id="vnjby"><input id="vnjby"></input></ruby></em><dd id="vnjby"><track id="vnjby"></track></dd>
  • <em id="vnjby"></em>

    <tbody id="vnjby"><pre id="vnjby"></pre></tbody>

  • <rp id="vnjby"><acronym id="vnjby"></acronym></rp>
    <tbody id="vnjby"><pre id="vnjby"><dl id="vnjby"></dl></pre></tbody>

  • <th id="vnjby"></th>

    設為首頁    收藏本站

    華彩光電首頁
          產品列表
    排水溝模具
    排水渠模具
    流水渠模具
    排水槽模具
    流水槽模具
    配重塊模具
    拉盤模具
    方涵模具
    圍墻板模具
    流水槽鋼模具
          資質榮譽
          聯系我們
    保定市晨澤模具制造有限公司
    地址:保定市城東工業區
    電話:18831266588
    傳真:0312-8103818
    郵箱:107108222@qq.com
    最新資訊

    流水渠模具的用途及制作步驟

    [關閉該頁][設為首頁][添加收藏][發送朋友][打印][ ]

    流水渠模具是修建道路或者水利工程上常用到的一種模具產品,也可叫做排水渠模具、水渠模具、水溝模具、水槽模具等等,一般工廠施工人員會在模具的表面增加5mm左右厚度的橫筋和豎筋對模具進行加固,這樣不但模具的使用壽命增加,還可以避免模具多次使用后不出現漏漿的現象,可以有效的在注入混凝土時承受住來自大量混凝土帶來的壓力,平時在運輸和使用的過程中需要注意不要磕碰到模具,給工程避免造成不必要的損失,縮短模具的使用時長,一旦發現模具受損一定要及時補救,速度聯系模具生產工廠重新制作模具,在模具制作工廠重新制作模具的過程中,為了不耽誤工期,可以使用另外一個同樣形狀、尺寸的模具制作生產水渠。

    The water channel mold is a kind of mold product commonly used in road construction or water conservancy project, which can also be called drainage channel mold, water channel mold, ditch mold, water tank mold, etc. the general factory construction personnel will add 5mm thick horizontal and vertical reinforcement to the mold surface to reinforce the mold, so as to not only increase the service life of the mold, but also avoid multiple use of the mold After the phenomenon of no leakage, it can effectively bear the pressure from a large number of concrete when pouring concrete. Usually in the process of transportation and use, it is necessary to pay attention not to bump into the mold, which will cause unnecessary loss to the project and shorten the use time of the mold. Once the mold is damaged, it must be timely remedied, and contact the mold production factory for re production Mold: in the process of re manufacturing the mold in the mold manufacturing factory, in order not to delay the construction period, another mold with the same shape and size can be used to make the production channel.

    流水渠模具在拼接好的模具內均勻地刷上一層脫模劑后就可以澆筑混凝土了,注意使用的混凝土需要提前使用混凝土攪拌機按照規定的比例進行配比并攪拌均勻。注漿后需要使用振動棒勻速攪拌混凝土泥漿,這個步驟對于梯形水溝預制件的生產制作而言是十分重要的,因為如果震動不充分在預制件內部留有氣泡,導致其表面形成一層密密麻麻的蜂窩狀孔洞,十分影響美觀,同時還會導致梯形水溝抗壓能力不足,容易坍塌,震動后就可以直接等待其完全凝固,拆除梯形水溝模具了。

    The concrete can be poured after a layer of release agent is evenly applied on the assembled mold of the flow channel. Attention should be paid to the concrete to be used in advance. The concrete mixer should be used in advance to mix and mix evenly according to the specified proportion. After grouting, it is necessary to use vibrating rod to mix concrete slurry at a constant speed. This step is very important for the production and production of trapezoidal ditch prefabricated parts. If the vibration is not sufficient, there will be bubbles in the precast parts, which will lead to a layer of dense honeycomb holes on the surface of the prefabricated parts, which will greatly affect the aesthetics. At the same time, it will also cause the trapezoidal ditch with insufficient compressive capacity and easy collapse, After vibration, it can wait for it to solidify completely and dismantle the trapezoidal ditch mold.


    【上一個】 定做流水槽模具需要注意哪些方面 【下一個】 水槽模具如何安裝使用


     · 流水渠模具的用途及制作步驟 · 排水渠模具的形狀及使用范圍

    水槽模具,排水槽模具,流水槽模具-保定市晨澤模具制造有限公司 |護坡磚模具|溝蓋板模具|隔離墩模具|排水溝模具 |排水溝模具
    一卡二卡三卡四卡网站,一卡二卡三卡网站,插曲视频30分钟软件,插曲的痛的视频30分,高清一卡二卡三卡四卡免费 开封县| 调兵山市| 卢湾区| 九龙坡区| 闸北区| 通化市| 承德县| 麻栗坡县| 桃源县| 南漳县| 景宁| 来安县| 南皮县| 和田市| 宜良县| 康乐县| 西充县| 曲阜市| 清徐县| 静安区| 黄浦区| 锡林郭勒盟| 城固县| 介休市| 澎湖县| 黑山县| 蓬莱市| 缙云县| 东兴市| 安仁县| 七台河市| 中西区| 桦川县| 开封市| 宁波市| 佛冈县| 西乌| 团风县| 乡宁县| 石阡县| 桐柏县| 宁蒗| 南靖县| 凌源市| 肥东县| 澄迈县| 永平县| 青龙| 渝中区| 宾阳县| 登封市| 徐州市| 房山区| 四子王旗| 石柱| 林口县| 彩票| 莱芜市| 台中市| 陈巴尔虎旗| 马山县| 龙海市| 宜春市| 进贤县| 五指山市| 平罗县| 志丹县| 哈尔滨市| 荃湾区| 报价| 临泉县| 兴安盟| 宝山区| 沈丘县| 宁波市| 门头沟区| 栾城县| 伊通| 九寨沟县| 和硕县| 揭西县| 朝阳市|