The shape design requirements of the flume mold are not fixed. In the produced flume mold, there are not only rectangular, trapezoidal, but also U-shaped or other shapes. Therefore, according to the production requirements of the flow channel precast block, the steel plate is selected according to the required length. Large water tanks are made with the help of forklift truck or crane. Basically, the hanging rings are made on the concrete water trough, and then they are cut off when they are used. Different styles of water tank molds have their own characteristics in the key points of production,
According to the requirements of the production of the water tank mold, according to the internal structure and external characteristics of the water tank mold, the template processing is carried out. From the perspective of the usage of the flume mold, it is concentrated in the three eastern provinces, especially in Jilin Province and Liaoning Province. Most of them are finished by prefabrication in the prefabrication plant. The knowledge points of water trough mold start from the processing content, from the mold finalization to the processing, the whole process is according to the drawing production process, from computer numerical control cutting to machine cutting to manual welding, generally takes about a week; from the use of the water trough mold, it is completed through the prefabrication operation; the storage of the mold is very critical, because the steel mold is easy to rust, so in order to ensure the quality of the product, the design of the water trough mold is very important If it can be used many times, it is necessary to brush antirust paint on the surface, which can effectively ensure the long-term use of the mold.