The material of the drainage channel mould directly affects the quality of the mould. No matter what shape it is made of, its essence is that it will not change. The steel is solid and durable, can resist strong pressure, is not easy to deform, is not easy to corrode, and is the preferred raw material for many moulds. Drainage channel mould, highway drainage channel mould, high-speed rail water channel mould manufacturers and U-shaped structure make the water flow increase, and when using the mould for production and manufacturing, the disassembly and assembly are simple, greatly increasing the production efficiency. The content of the drainage channel mold is to introduce the structure of the whole mold. The drainage channel belongs to a kind of small steel mold. The mold is made by bending and welding the steel plate, and the thickness and specification of the steel plate selected according to the size of the mold are different. The drainage channel mould is assembled according to the size set in the drawing, and each plate surface of the mould is connected with screws. After the connection is completed, it needs to be fixed, and the upper and lower parts of a mould need to be fixed with two fixed pipes and brushed with oil. Brush oil or diesel oil on the inner side of the prefabricated U-groove mold, evenly smear and fill. Pour the mixed concrete 5: while vibrating the grouting, use the vibrating rod to move in, remove the bubbles, and make the interior closer.
The design requirement of the drainage channel mold is to make the internal drainage of the pavement structure on the basis of the surface drainage, so that the road works can be improved. The pavement is directly exposed to the surface, so the impact of water will be directly felt. If the humidity of the road increases, the use quality will be reduced, because of the damage of water to the subgrade, and the main source of water on the pavement is It's the atmospheric precipitation formed by rain and snow. If it's summer, we should always pay attention to the rainstorm, because the rainstorm may destroy the shoulder and subgrade, make the subgrade soft, and may cause frost heaving in winter. When using the gutter mold, pay attention to the installation of two lifting rings on the surface before the concrete is dry, and the concrete can be demoulded after being placed for about one day, the screws can be removed, the panel can be removed, and the product can be placed in a specific place by using the line crane.